Polymeric Sand Colors: Beige, Slate Gray, Ivory, Black Diamond, Brown
Joint color changes a patio more than most people expect. The same pavers read crisp and outlined with a contrasting joint, or calm and continuous with a joint that blends in. It is also a decision you live with, because once the sand is watered in it is not a quick swap. Here is how to choose among the five Rhino Power Bond Plus colors.
Quick answer. Decide blend or contrast first. Match the undertone of your pavers (warm or cool). Never choose from a screen or a bag photo: lay the sand against your own pavers outdoors, dry and damp, and look from standing height. Sealer darkens the surface, so test that too.
Blend or contrast
- Blend. A joint close to the main tone of the pavers makes the surface read as one field. Suits busy patterns, multi color blends and small spaces.
- Contrast. A joint clearly lighter or darker than the pavers outlines each unit. Shows off herringbone and large format slabs, and also shows off any uneven joint.
- Undertone. Pavers lean warm (tan, red, brown) or cool (gray, charcoal, blue gray). A joint with the same undertone looks intended even when it is lighter or darker. With a multi color blend, pick a joint that matches one tone already in the blend.
The five colors
| Color | Where it sits | Suggested pairings |
|---|---|---|
| Beige | Warm light neutral, the most common choice | Tan, buff and sand colored concrete pavers; blends with warm blends, contrasts gently with charcoal |
| Slate Gray | Cool mid gray | Gray and charcoal pavers for a blend; light gray or white pavers for a soft outline |
| Ivory | Warm off white, the lightest | Cream and white pavers for a blend; dark pavers when you want every joint outlined |
| Black Diamond | Deep charcoal black, the darkest | Charcoal and dark gray pavers for a blend; light pavers for a strong grid |
| Brown | Warm dark brown | Red, brown and rust toned pavers; hides soil and leaf stain better than the light colors |
Every color is the same sand with the same joint width rating, coverage and rain safe time; only the color changes.
Why screens and bag photos mislead
Sand color varies with the natural aggregate and with moisture, and every screen shows color differently. A cured joint never looks like loose sand in a bag or in a photo. Treat the swatches on the product page as a starting point, not a decision.
How to test against your pavers
- Lay two or three of your pavers side by side with a gap like your planned joint.
- Pour a little sand into the gap, or in a line on paper beside the pavers.
- Look outside in daylight: morning, midday and late afternoon if you can.
- Look from standing height and from the house or deck, not only up close.
- Mist the sand and the pavers and look again. Joints look different after rain.
- Photograph each option from the same spot.
Then install a small, discreet test area first and judge the cured color in place.
Wet, dry and sealed
A joint is darker when damp and lightens as it dries. Light and porous pavers can darken after installation. If you plan to seal, test the sealer on the same pavers: many sealers deepen the surface color, and a wet look sealer darkens both the paver and the joint. Wait 28 days after installing the sand before sealing.
Rhino Power Bond Plus, choose your color · How many bags: calculator · How to install · FAQ