Rhino Polymeric Sand Installation
In the world of hardscaping, the foundation might be the stones and pavers, but what binds them together, giving them strength and longevity, is just as crucial. Enter Rhino Polymeric Sand. This unsung hero ensures your patio, driveway, or walkway stands the test of time. However, if not installed properly, it can lead to issues like weed growth, insect infestation, and unstable pavers, compromising the longevity and appearance of your hardscaping project. This is why today we will take you through the proper steps of installing polymeric sand and talk about the benefits of choosing Rhino sand for your next project.
Steps to Install Polymeric Sand
Following a systematic approach is key in your hardscaping project. The following steps will ensure your installation goes smoothly and you achieve the aesthetics and durability known when using polymeric sand.
Spreading
First, begin by evenly spreading the Rhino Polymeric Sand over your project area. Both the surface and the joints of the pavers must be dry. Use a push broom to distribute the sand, ensuring it fills the joints adequately. Remember, the goal is to get the sand into every nook and cranny. Typically, the sand must be dry and have 24 hours to settle before moving on to the next step. Different types of polymeric sand work with various joint widths. Before spreading, ensure the joint width you are working with matches the polymeric sand recommendation.
Consolidation
Then comes consolidation. This step is about making sure the sand settles well into the joints. First, use a compactor to press down on the sand. This ensures the polymeric sand reaches the bottom of the paver joints. This not only gives a neat finish but also ensures longevity. However, you need to keep in mind there needs to be a layer between the compactor and the stones to prevent any damage from the force. Using plywood is a good technique, but you can also install a permanent base layer on the compactor. If this step is skipped, air pockets will likely occur, leading to an uneven surface. The consolidation also needs to ensure the polymeric sand is a minimum of 1/8 of an inch below the chamfer. If it is any higher than this, the pressure from walking on top will eventually lead to sand erosion and failure of consolidation. So, the final step in consolidation should typically involve a leaf blower to remove any excess sand and dust from the surface. This will ensure proper joint height in the end and lead to a smooth finish. However, with Rhino Polymeric Sand, this step can be skipped. Rhino uses a new generation of Intelligent Polymers that neutralizes haze and dust, making the installation dust and haze-free.
Activation
The final step is to activate the polymeric sand. This is done by watering the sand, which triggers its binding properties. However, it's crucial to follow Rhino's specific watering instructions, which can be found on the back of the package. Too much or too little water can affect the outcome. Typically, the activation takes 24 hours. But the Rhino Polymeric Sand, unlike other products, uses rapid rainfast technology, helping it activate in under an hour using only one watering. This helps to ensure your project is set and secure, come rain or shine. So no more 24-hour waiting period.
These simple steps will ensure that your hardscaping project looks professional and stands the test of time.
Benefits of Rhino Polymeric Sand
While other products and polymeric sands are out there, we know every detail matters. Choosing the right sand can make all the difference.
So why choose Rhino?
Firstly, Rhino isn't just any sand. It's a fusion of the finest sands and high-grade polymers, ensuring your pavers are bound with a strength that's built to last. Rhino Power Bond Plus Polymeric can be used for joints up to a maximum of 4 inches in drainage application and 2 inches in overlay application.
It's also versatile and can be used in various ways, including pool decks, patios, footpaths, driveways, parking spaces, and pavements. Available in Beige, Slate Grey, and Black Diamond, it is ideal for concrete pavers, natural stones, wet-cast products and clay pavers.
But what separates Rhino from the rest is our rainfast technology, allowing it to activate in under an hour. The technology also eliminates haze caused by other brands by reducing material left on top of pavers after sweeping in our black sand and blowing off any excess.
Conclusion
In the realm of hardscaping, the choices you make can transform an ordinary space into something extraordinary. Rhino Polymeric Sand is more than just a binding agent; it's a promise of quality, durability, and elegance. Unlike other companies, we are here to help at all times. Our highly knowledgeable staff is here to answer any and all of your questions. By following the steps outlined and being aware of potential challenges, you ensure that your outdoor space not only looks impeccable but also stands strong against the test of time.
Choose Rhino, choose excellence.
